Other Products Available through us.

Welcome to ModelTengine.com - a Gen III Antique Auto website

PLEASE BE PATIENT AS WE WORK THE BUGS OUT OF OUR NEW WEBSITE!

Modern Bearings:

Type 1 Outer Rear Wheel Bearings (2 Required)

Modern sealed outer axle bearing - less friction, sealed for oil leaks.

$350 for a set, includes the two bearings you need.

* very minor "machining" needs to be done to get these to fit in some cars. Can be installed without removing the axles with a simple trick involving sandpaper and a paint stirring stick.

Inner Carrier Bearings (2 required - Price for Each)

Modern sealed inner axle bearing - less friction and sealed for oil leaks.

$250 for a set, includes two bearings.

* your axle needs to be machined to use these bearings. If you send your axles to us, we will machine them for you for free.

Thrust Roller Bearings (2 Required - Price for Each)

Roller Thrust Washers

Replace your bronze or babbitt thrust washers with this low friction set. A high quality reproduction of an original performance accessory.

$80 for a stock axle (one for each side).

Type 3 Floating Rear Hubs (2 Required) (Wood)

Full Floating Hub for Wood Wheels.

Keeps your rear wheel from passing you on the road if your axle breaks. They also lower the stress and chances of breaking because the weight of the car is no longer held up by the tiny stock Ford axle. With this hub, the weight is supported by the larger/stronger stock axel housing.

$470 for a set (includes both left and right hubs)

*My personal recommendation: Use these with the inner hubs above to prevent leaks.

Type 3 Floating Rear Hubs (2 Required)(Wire)

Full Floating hub for Wire Wheels.

$470 for a set (includes both left and right hubs)

*My personal recommendation: Use these with the inner hubs above to prevent leaks.

Rebuilt 6Volt Model T Generator:

All new parts used here too, just like our starters.

*Full One Year Warranty*

$260 with your rebuildable core, or $310 outright.

Kevlar Band Linings:

Only $99

Comes with detailed instructions (not pictured)

Nylon Timing Gears:

$75

This can be purchased with stock timing, or setup for 1/2 tooth advanced

NEW carburetors:

$200

It's a brand new Holley NH "Swayback". Available for 26/27 (shown on left) or 09-25 (shown on right). A new gasket is included, the mixture knob shown in the right photo is not included. No Core Charge.

New Exhaust Manifolds:

$100

Replace your worn out or bent exhaust manifold with this brand new one.

High Temp "cast iron look" coating is available for an additional $10 (shown in photo)

New Stipe cam:

$365

This is the one you need if your serious about your Model T's performance. It's available in two grinds, stock (0.250 lift) or Improved (0.280 lift).

With this cam you simply set your valve lash at 0.010" and fire it up! Run super quiet, see our "news" page to watch a video of an engine running with this cam (280) and the nylon gear above in it.

[ Home ] [ Up ]